August 1, 2021

Haribo Gold-Bears Gummy Candy

The nearly 100-year-old candy recipe can be easily replicated with Jell-O and a few other ingredients. But it's a little bit of food science that makes this gummy candy hack different than any other.

Hans Riegel took the first two letters of his first and last name and the first two letters of Bonn, the German city where he founded his candy company in 1920, to create the world-famous acronym: HARIBO.

Two years later, he invented Gold-Bears, the gummy candy that would eventually make his company worth billions.

I spent several weeks figuring out how we can be just like Hans and make our own gummy candies at home, and I discovered that it’s not hard at all. The only special equipment you’ll need is silicone gummy bear molds. And a little patience.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

The easiest way to make home gummy bears is to use flavored, sweetened gelatin; a.k.a. Jell-O. Fortunately Jell-O comes in all the flavors we need to make the same five flavors that are in a bag of Haribo bears.

If you want to make all the same flavors you’ll need raspberry, lemon, orange, pineapple and…another one. The green bear creates a challenge for us because it’s not the flavor you think.

Most people think it’s lime. But it isn’t.

And it’s not green apple, melon, kiwi, or any other flavor that makes sense.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

In Hans Riegel’s world, green equals strawberry. If you want to know why you’ll have to ask him, which is impossible because he died a very long time ago.

Here’s where you need to make a decision: do you create gummy bears that look like Haribo gummy bears by using lime Jell-O for the green, or are you a flavor purist and will only consider using strawberry Jell-O, even if it’s red, so that your gummies taste the same?

I’ll leave that up to you, but for the sake of this blog, and since you can’t taste photos, I’m going with lime.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Haribo bears are formed in molds made out of compressed cornstarch. After the bears set up, the molds are shaken apart over screens and the bears are separated from the cornstarch, then cornstarch gets recycled and used again.

We are not using cornstarch molds today. That would be crazy. But we can use readily available silicone molds found online. Be sure to get the molds with 1-inch bears to make standard-size gummy bears. The bears will shrink by almost 25% after setting, so this size mold will make bears that are just over 3/4-inch tall, like the real ones.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

In addition to Jell-O, there are a few other ingredients you’ll need.

The Jell-O doesn’t have enough gelatin in it to make a chewy candy, so we need to add more in the way of pure, unflavored gelatin. You’ll need 1 packet of Knox brand unflavored gelatin for each batch.

Citric acid is an important ingredient in gummy candies to help wake up the flavor. Sour gummies use citric acid in the candy syrup and on the surface of the candy, but we need just a little here for the syrup. The acid also serves as a preservative and as something called an “interfering agent.” That brings us to the corn syrup.

You won’t find corn syrup in most homemade gummy recipes, and that’s too bad, because without it you get this…

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Without corn syrup in this recipe your gummies will look and feel terrible in about a week.

Corn syrup adds sweetness to the candy, but its primary function in this recipe is as an interfering agent to prevent crystallization like what you see here.

Here’s how it works, but be warned: I’m about to get a little science-y on you. Don’t worry, it’ll be over quickly.

The corn syrup is a starch made up of a chain of glucose molecules that are smaller than the sucrose (sugar) molecules in the Jell-O mix we’re using. When heated, the string of corn syrup glucose molecules breaks apart and gets between the sucrose molecules, effectively interrupting the formation and growth of sugar crystals. You could say that corn syrup is like the wax paper you put between hamburger patties before freezing them. If you don’t use wax paper, all the patties will stick together and you end up with one giant, super-thick burger patty come grill time. That’s awesome for you, but then what’s everybody else having for dinner?

Conclusion: You need corn syrup or an invert sugar (even honey!) in gummies so that they stay soft and chewy.

Haribo Gold-Bears Gummy Candy copycat recipe by Todd Wilbur

Pour all the dry ingredients in a bowl and mix them together.

Then you can add the water and corn syrup.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

This is where it really pays to be calm. You don’t want to create any air bubbles in the candy syrup, so stir this mixture gently until all of the ingredients are combined.

Don’t use a whisk because that will aerate the syrup.

An ordinary soup spoon is perfect for this.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

The gelatin needs to re-hydrate, or bloom, so that it can do its magic. Give the candy syrup a rest.

When Hans made his first gummy bears in 1922 he used gum arabica to make them chewy. This rubbery resin from the acacia tree has since been replaced by more available gelatin, a protein-rich thickener containing 18 amino acids used in many foods such as marshmallows, soups, and salad dressings, and in other consumer products like vitamin capsules and photographic film.

Gelatin is pretty amazing stuff, but it needs time to do its thing. And it needs heat…

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Your microwave oven is the easiest and quickest way to heat up the syrup so that the solid ingredients dissolve.

The trick is to heat up the syrup in stages. This way the syrup won’t boil, creating bubbles.

I’m going with 30 seconds, then 15 seconds 4 times, for a total of 1 1/2 minutes. Stir gently between each zapping.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Now the syrup gets to hang out for a bit.

This will allow it to cool, and any tiny bubbles will rise to the top.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Every couple of minutes, give the syrup a gentle stir.

You should notice the syrup getting clearer as it rests.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Gelatin syrup is super sticky.

To make sure your bears come out of the molds easily and in one piece, give the molds a quick spritz with oil spray.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

The best way to pour the syrup into the molds is with a spouted measuring cup.

You may have received some droppers with your molds, but don’t use them. They add too many air bubbles to the syrup and the bubbles are impossible to pop.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Let’s take a closer look.

For hacked gummy bears that look like the real bears—not too thick, and not too thin—it’s important to fill the molds properly.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

Now you can take a break while the gummies set up.

After about 30 minutes you can move them to the refrigerator.

Push aside your Cheesecake Factory leftovers and make room for the two mold trays in your fridge.

The cold temp will help the gummies set up faster.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

After a half-hour in the chiller, you can pop all of the gummies out the molds and arrange them upright somewhere out of the way so that they can begin to dehydrate and toughen up.

Standing them like this is the best way to maximize surface-to-air exposure.

You can eat them now if you like, but at this point they will be much softer than real Haribo Gold-Bears.

Haribo Gold-Bears Gummi Candy copycat recipe by Todd Wilbur

After a couple of days standing and one day lying down, your bears should become much chewier. The longer you leave them out, the chewier they will get.

When the bears are chewy enough for you, seal them up in an airtight zip-top bag or storage container.

If they begin to stick together, toss them with a pinch of cornstarch.

Todd Wilbur, The Food Hacker

What other famous foods can be made at home? I’ve hacked over 1,100 iconic foods at TopSecretRecipes.com. Click here to find your favorites.

 

Make restaurant-style dishes at home

Get more Top Secret Recipes from Todd Wilbur at https://topsecretrecipes.comGet more Top Secret Recipes

Haribo Gold-Bears Gummy Candy Hack

The nearly 100-year-old German candy recipe can be hacked with Jell-O and a few other ingredients. This recipe makes one flavor, but can be repeated for every flavor you want to include in the finished product.

Prep Time20 mins

Cook Time3 d

Total Time3 d 20 mins

Servings: 50 pieces

Author: Todd Wilbur

  • 1 3-ounce box Jell-O Gelatin Dessert powder (Raspberry, lemon, orange, pineapple, lime or strawberry)
  • 1 pkg. Knox unflavored gelatin (7.2g)
  • 1/4 teaspoon citric acid
  • 1/4 cup corn syrup
  • 1/3 cup water (room temperature)

You will also need:

  • 2 1-inch silicone bear candy molds
  • Oil cooking spray
  • Combine Jell-O, unflavored gelatin and citric acid in a medium microwave-safe bowl and stir to combine.

  • Add the corn syrup and water, and stir gently with a soup spoon until all of the ingredients are blended together. Stirring too fast may add air bubbles to the mixture, so keep it slow and sweeping. Let the mixture sit for 5 minutes so that the gelatin can bloom.

  • Stir the candy syrup gently again, then microwave it on high for 30 seconds. Stir it again, then zap it for another 15 seconds. Repeat heating it for 15 seconds 3 more times for a total heating time of 1 1/2 minutes. If air bubbles begin to form on the surface of the gelatin, stop heating and stir gently. You don't want any bubbles in the syrup if you can help it. Let the mixture sit for 10 minutes. Give the solution a gentle stir every couple of minutes and you should see it become clearer over time.

  • Spray the bear molds lightly with oil spray.

  • Pour the candy syrup into a measuring cup with a spout, then carefully pour the liquid into the bear molds. Don't fill each bear all of the way to the top. Leave a little room in each mold.

  • Let the candy sit for 30 minutes, then put the molds into your refrigerator for another 30 minutes.

  • When the candy is firm push each piece out of the molds and arrange them on a baking sheet or in a large storage container so that they are each standing upright. Let them sit this way for 48 hours, then lay them on their backs for 24 hours. This process will help the bears dehydrate so that they are chewy like the originals. Depending on your climate, your gummy bears may have shrunken enough after 72 hours. If not, leave them out for another day or two, until they are chewy. Toss them around every so often as they dry out. When they are chewy enough for you, seal them up in an air-tight covered container or zip-top bag. Keep them stored in a sealed container and they should last for a couple weeks.

If your gummies begin to stick together, toss them with a pinch of cornstarch. Real gummies have traces of cornstarch on them from the manufacturing process. The molds they are shaped in are made out of pressed cornstarch in a machine called a "mogul." What other famous foods can be made at home? I've created recipes for over 1,100 iconic foods. Visit TopSecretRecipes.com to see if I've hacked your favorites.

Source